Versatile Click Linker Enabling Native Peptide Release from Nanocarriers upon Redox Trigger.

Nanocarriers have shown their ability to extend the circulation time of drugs, enhance tumor uptake, and tune drug release. Therapeutic peptides are a class of drug compounds in which nanocarrier-mediated delivery can potentially improve their therapeutic index. To this end, there is an urgent need for orthogonal covalent linker chemistry facilitating the straightforward on-the-resin peptide generation, nanocarrier conjugation, as well as the triggered release of the peptide in its native state. Here, we present a copper-free clickable ring-strained alkyne linker conjugated to the N-terminus of oncolytic peptide LTX-315 via standard solid-phase peptide synthesis (SPPS). The linker contains (1) a recently developed seven-membered ring-strained alkyne, 3,3,6,6-tetramethylthiacycloheptyne sulfoximine (TMTHSI), (2) a disulfide bond, which is sensitive to the reducing cytosolic and tumor environment, and (3) a thiobenzyl carbamate spacer enabling release of the native peptide upon cleavage of the disulfide via 1,6-elimination. We demonstrate convenient "clicking" of the hydrophilic linker-peptide conjugate to preformed pegylated core-cross-linked polymeric micelles (CCPMs) of 50 nm containing azides in the hydrophobic core under aqueous conditions at room temperature resulting in a loading capacity of 8 mass % of peptide to polymer (56% loading efficiency). This entrapment of hydrophilic cargo into/to a cross-linked hydrophobic core is a new and counterintuitive approach for this class of nanocarriers. The release of LTX-315 from the CCPMs was investigated in vitro and rapid release upon exposure to glutathione (within minutes) followed by slower 1,6-elimination (within an hour) resulted in the formation of the native peptide. Finally, cytotoxicity of LTX CCPMs as well as uptake of sulfocyanine 5-loaded CCPMs was investigated by cell culture, demonstrating successful tumor cell killing at concentrations similar to that of the free peptide treatment.

Specific N-terminal attachment of TMTHSI linkers to native peptides and proteins for strain-promoted azide alkyne cycloaddition.

The site specific attachment of the reactive TMTHSI-click handle to the N-terminus of peptides and proteins is described. The resulting molecular constructs can be used in strain-promoted azide alkyne cycloaddition (SPAAC) for reaction with azide containing proteins e.g., antibodies, peptides, nanoparticles, fluorescent dyes, chelators for radioactive isotopes and SPR-chips etc.

Exploring the Chemical Properties and Medicinal Applications of Tetramethylthiocycloheptyne Sulfoximine Used in Strain-Promoted Azide-Alkyne Cycloaddition Reactions.

The recently developed compound, tetramethylthiocycloheptyne sulfoximine (TMTHSI), has shown to be a promising strained alkyne for strain-promoted azide-alkyne cycloaddition (SPAAC), metal-free click chemistry. This research explores the properties of TMTHSI-based compounds via three aspects: (1) large-scale production, (2) unique stability in acidic conditions and its subsequent use in peptide synthesis, and (3) the functionalization of antibodies. Here, it is shown that (1) scale-up is achieved on a scale of up to 100 g. (2) TMTHSI is remarkably stable against TFA allowing for the site-specific functionalization of peptides on resin. Finally, (3) the functionalization of an antibody with a model payload is very efficient, with antibody conjugation demonstrating more beneficial features such as a high yield and limited hydrophobicity as compared to other alkyne reagent conjugates. These results illustrate the high potential of TMTHSI for diverse bioconjugation applications, with production already being GMP-compatible and a highly efficient conversion resulting in attractive costs of goods.

Orthogonal Covalent Entrapment of Cargo into Biodegradable Polymeric Micelles via Native Chemical Ligation.

Polymeric micelles (PMs) are promising platforms for enhanced tissue targeting of entrapped therapeutic agents. Strategies to circumvent premature release of entrapped drugs include cross-linking of the micellar core as well as covalent attachment of the drug cargo. The chemistry employed to obtain cross-linked micelles needs to be mild to also allow entrapment of fragile molecules, such as certain peptides, proteins, oligonucleotides, and fluorescent dyes. Native chemical ligation (NCL) is a mild bio-orthogonal reaction between a N-terminal cysteine residue and a thioester that proceeds under physiological conditions. Here, we designed a trifunctional cross-linker containing two cysteine residues for the micelle core-cross-linking reaction and an azide residue for ring-strained alkyne conjugation of fluorescent dyes. We applied this approach to thermosensitive methoxypolyethylene glycol-b-N-(2-hydroxypropyl)methacrylamide-lactate (mPEG-b-HPMAmLacn) based block copolymers of a core-cross-linked polymeric micelle (CCPM) system by attaching thioester residues (using ethyl thioglycolate-succinic anhydride, ETSA) for NCL cross-linking with the trifunctional cross-linker under physiological conditions. By use of mild copper-free click chemistry, we coupled fluorescent dyes, Sulfo.Cy5 and BODIPY, to the core via the azide residue present on the cross-linker by triazole ring formation. In addition, we employed a recently developed cycloheptyne strain promoted click reagent (TMTHSI, CliCr) in comparison to the frequently employed cyclooctyne derivative (DBCO), both achieving successful dye entrapment. The size of the resulting CCPMs could be tuned between 50 and 100 nm by varying the molecular weight of the thermosensitive block and ETSA content. In vitro cell experiments showed successful internalization of the dye entrapped CCPMs, which did not affect cell viability up to a polymer concentration of 2 mg/mL in PC3 cells. These fluorescent dye entrapped CCPMs can be applied in diagnostic imaging and the chemistry developed in this study serves as a steppingstone toward covalently entrapped fragile drug compounds with tunable release in CCPMs.

Design, development and clinical translation of CriPec®-based core-crosslinked polymeric micelles.

Nanomedicines are used to improve the efficacy and safety of pharmacotherapeutic interventions. Unraveling the biological behavior of nanomedicines, including their biodistribution and target site accumulation, is essential to establish design criteria that contribute to superior performance. CriPec® technology is based on amphiphilic methoxy-poly(ethylene glycol)-b-poly[N-(2-hydroxypropyl) methacrylamide lactate] (mPEG-b-pHPMAmLacn) block copolymers, which are designed to upon self-assembly covalently entrap active pharmaceutical ingredients (API) in core-crosslinked polymeric micelles (CCPM). Key features of CCPM are a prolonged circulation time, high concentrations at pathological sites, and low levels of accumulation in the majority of healthy tissues. Proprietary hydrolysable linkers allow for tunable and sustained release of entrapped API, including hydrophobic and hydrophilic small molecules, as well as peptides and oligonucleotides. Preclinical imaging experiments provided valuable information on their tumor and tissue accumulation and distribution, as well as on uptake by cancer, healthy and immune cells. The frontrunner formulation CPC634, which refers to 65 nm-sized CCPM entrapping the chemotherapeutic drug docetaxel, showed excellent pharmacokinetic properties, safety, tumor accumulation and antitumor efficacy in multiple animal models. In the clinic, CPC634 also demonstrated favorable pharmacokinetics, good tolerability, signs of efficacy, and enhanced localization in tumor tissue as compared to conventional docetaxel. PET imaging of radiolabeled CPC634 showed quantifiable accumulation in âˆ¼50 % of tumors and metastases in advanced-stage cancer patients, and demonstrated potential for use in a theranostic setting even when applied at a companion diagnostic dose. Altogether, the preclinical and clinical results obtained to date demonstrate that mPEG-b-pHPMAmLacn CCPM based on CriPec® technology are a potent, tunable, broadly applicable and well-tolerable platform for targeted drug delivery and improved anticancer therapy.

A New Class of Tunable Acid-Sensitive Linkers for Native Drug Release Based on the Trityl Protecting Group.

Core-cross-linked polymeric micelles (CCPMs) are a promising nanoparticle platform due to favorable properties such as their long circulation and tumor disposition exploiting the enhanced permeability and retention (EPR) effect. Sustained release of covalently linked drugs from the hydrophobic core of the CCPM can be achieved by a biodegradable linker that connects the drug and the core. This study investigates the suitability of trityl-based linkers for the design of acid-triggered native active pharmaceutical ingredient (API) release from CCPMs. Trityl linker derivatives with different substituent patterns were synthesized and conjugated to model API compounds such as DMXAA-amine, doxorubicin, and gemcitabine, and their release kinetics were studied. Hereafter, API release from CCPMs based on mPEG-b-pHPMAmLac block copolymers was investigated. Variation of the trityl substitution pattern showed tunability of the API release rate from the trityl-based linker with t1/2 varying from <1.0 to 5.0 h at pH 5.0 and t1/2 from 6.5 to >24 h at pH 7.4, all at 37 °C. A clear difference in release kinetics was found between gemcitabine and doxorubicin, with gemcitabine showing no detectable release for 72 h at pH 5.0 and doxorubicin showing a t1/2 of less than 1 h. Based on these findings, we show that the reaction mechanism of trityl deprotection plays an important role in the API release kinetics. The first step in this mechanism, which is protonation of the trityl-bound amine, is pKa-dependent, which explains the difference in release rate. In conclusion, acid-sensitive and tunable trityl linkers are highly promising for the design of linker-API conjugates and for their use in CCPMs.

Synthesis of a tricyclic hexapeptide -via two consecutive ruthenium-catalyzed macrocyclization steps- with a constrained topology to mimic vancomycin's binding properties toward D-Ala-D-Ala dipeptide.

A ring-closing metathesis (RCM) - peptide coupling - ruthenium-catalyzed azide alkyne cycloaddition (RuAAC) strategy was developed to synthesize a tricyclic hexapeptide in which the side chain to side chain connectivity pattern resulted in a mimic with a topology that effectively mimics the bioactivity of vancomycin as a potent binder of the bacterial cell wall D-Ala-D-Ala dipeptide sequence and more importantly being an effective inhibitor of bacterial growth.

Design and Synthesis of HCV-E2 Glycoprotein Epitope Mimics in Molecular Construction of Potential Synthetic Vaccines.

Hepatitis C virus remains a global threat, despite the availability of highly effective direct-acting antiviral (DAA) drugs. With thousands of new infections annually, the need for a prophylactic vaccine is evident. However, traditional vaccine design has been unable to provide effective vaccines so far. Therefore, alternative strategies need to be investigated. In this work, a chemistry-based approach is explored towards fully synthetic peptide-based vaccines using epitope mimicry, by focusing on highly effective and conserved amino acid sequences in HCV, which, upon antibody binding, inhibit its bio-activity. Continuous and discontinuous epitope mimics were both chemically synthesized based on the HCV-E2 glycoprotein while using designed fully synthetic cyclic peptides. These cyclic epitope mimics were assembled on an orthogonally protected scaffold. The scaffolded epitope mimics have been assessed in immunization experiments to investigate the elicitation of anti-HCV-E2 glycoprotein antibodies. The neutralizing potential of the elicited antibodies was investigated, representing a first step in employing chemically synthesized epitope mimics as a novel strategy towards vaccine design.

Improving the aqueous solubility of HCV-E2 glycoprotein epitope mimics by cyclization using POLAR hinges.

In this research we describe the improvement of the water-solubility of cyclic epitope mimics based on the HCV E2 glycoprotein by incorporation of suitable polar hinges. The poor solubility of epitope mimics based on peptide sequences in the envelope (E2) protein hampered their synthesis and purification and made it very difficult to prepare the molecular constructs for evaluation of their bioactivity. Since changes in the amino acid composition are hardly possible in these epitope mimics in order to increase water-solubility, a polar cyclization hinge may offer a remedy leading to a significant increase of polarity and therefore water solubility. These polar hinges were applied in the synthesis of better water-soluble HCV-E2 epitopes. An azide functionality in the polar hinges allowed attachment of a tetraethylene glycol linker by Cu-catalyzed azide-alkyne cyclo-addition (CuAAC) for a convenient conjugation to ELISA plates in order to evaluate the bio-activity of the epitope mimics. The immunoassays showed that the use of more polar cyclization hinges still supported anti-HCV antibody recognition and did not negatively influence their binding. This significantly increased solubility induced by polar hinges should therefore allow for the molecular construction and ultimate evaluation of synthetic vaccine molecules.

TMTHSI, a superior 7-membered ring alkyne containing reagent for strain-promoted azide-alkyne cycloaddition reactions.

We describe the development of TMTH-SulfoxImine (TMTHSI) as a superior click reagent. This reagent combines a great reactivity, with small size and low hydrophobicity and compares outstandingly with existing click reagents. TMTHSI can be conveniently functionalized with a variety of linkers allowing attachment of a diversity of small molecules and (peptide, nucleic acid) biologics.

A new perspective on fungal metabolites: identification of bioactive compounds from fungi using zebrafish embryogenesis as read-out.

There is a constant need for new therapeutic compounds. Fungi have proven to be an excellent, but underexplored source for biologically active compounds with therapeutic potential. Here, we combine mycology, embryology and chemistry by testing secondary metabolites from more than 10,000 species of fungi for biological activity using developing zebrafish (Danio rerio) embryos. Zebrafish development is an excellent model for high-throughput screening. Development is rapid, multiple cell types are assessed simultaneously and embryos are available in high numbers. We found that 1,526 fungal strains produced secondary metabolites with biological activity in the zebrafish bioassay. The active compounds from 39 selected fungi were purified by liquid-liquid extraction and preparative HPLC. 34 compounds were identified by a combination of chemical analyses, including LCMS, UV-Vis spectroscopy/ spectrophotometry, high resolution mass spectrometry and NMR. Our results demonstrate that fungi express a wide variety of biologically active compounds, consisting of both known therapeutic compounds as well as relatively unexplored compounds. Understanding their biological activity in zebrafish may provide insight into underlying biological processes as well as mode of action. Together, this information may provide the first step towards lead compound development for therapeutic drug development.

Molecular Construction of Sulfonamide Antisense Oligonucleotides.

An efficient and scalable synthesis of new oligonucleotide monomers was developed for replacement of the phosphodiester backbone of RNA by a sulfonamide-containing backbone to enable construction of sulfonamide antisense oligonucleotides (SaASOs). It was shown that by employing these sulfonamide RNA (SaRNA) monomers, it was possible to synthesize oligomers in solution. The properties of a sulfonamide moiety replacement were evaluated by incorporation of a SaRNA-monomer into a DNA strand and performing thermal stability tests of the resulting DNA and RNA-double-strand hybrids. Although sulfonamide modification caused a decrease in melting temperature (Tm) of both hybrids, it was lower for the sulfonamide-containing DNA-RNA hybrid than that for the sulfonamide-containing DNA-DNA hybrid.

Design, Synthesis, and Evaluation of a Diazirine Photoaffinity Probe for Ligand-Based Receptor Capture Targeting G Protein-Coupled Receptors.

Chemoproteomic approaches to identify ligand-receptor interactions have gained popularity. However, identifying transmembrane receptors remains challenging. A new trifunctional probe to aid the nonbiased identification of such receptors was developed and synthesized using a convenient seven-step synthesis. This probe contained three functional groups: 1) an N-hydroxysuccinimide ester for ligand-coupling through free amines, 2) a diazirine moiety to capture the receptor of interest upon irradiation with UV light, and 3) a biotin group which allowed affinity purification of the final adduct using streptavidin. The interaction between the G protein-coupled tachykinin neurokinin 1 (NK1) receptor, expressed in an inducible manner, and the peptidic ligand substance P was used as a test system. Liquid chromatography-mass spectrometry analysis confirmed successful coupling of the probe to substance P, while inositol monophosphate accumulation assays demonstrated that coupling of the probe did not interfere substantially with the substance P-NK1 receptor interaction. Confocal microscopy and western blotting provided evidence of the formation of a covalent bond between the probe and the NK1 receptor upon UV activation. As proof of concept, the probe was used in full ligand-based receptor-capture experiments to identify the substance P-binding receptor via liquid chromatography-tandem mass spectrometry, resulting in the successful identification of only the NK1 receptor. This provides proof of concept toward general utilization of this probe to define interactions between ligands and previously unidentified plasma-membrane receptors.

Synthesis and cellular penetration properties of new phosphonium based cationic amphiphilic peptides.

A new category of phosphonium based cationic amphiphilic peptides has been developed and evaluated as potential antimicrobial peptides and cell penetrating peptides. The required building blocks were conveniently accessible from cysteine and could be applied in a solid phase peptide synthesis protocol for incorporation into peptide sequences. Evaluation of the antimicrobial properties and cellular toxicity of these phosphonium based peptides showed that these "soft" cationic side-chain containing peptides have poor antimicrobial properties and most of them were virtually non toxic (on HEK cells tested at 256 and 512 µM) and non-haemolytic (on horse erythrocytes tested at 512 µM), hinting at an interesting potential application as cell penetrating peptides. This possibility was evaluated using fluorescent peptide derivatives and showed that these phosphonium based peptide derivatives were capable of entering HEK cells and depending on the sequence confined to specific cellular areas.

Synthetic antibody protein mimics of infliximab by molecular scaffolding on novel CycloTriVeratrilene (CTV) derivatives.

Syntheses of novel semi-orthogonally protected CycloTriVeratrilene (CTV) analogues with enhanced water solubility, that is 3 and 4, derived from the previously described CTV scaffold derivative 2 are described here. These scaffolds 2-4 enabled a sequential introduction of three different complementarity determining region (CDR) mimics via Cu(i)-catalysed azide-alkyne cycloaddition towards medium-sized protein mimics denoted as "synthetic antibodies". The highly optimised sequential introduction enabled selective attachment of three different CDR mimics in a one-pot fashion. This approach of obtaining synthetic antibodies, demonstrated by the synthesis of paratope mimics of monoclonal antibody infliximab (Remicade®), provided a facile access to a range of (highly) pre-organised molecules bearing three different (cyclic) peptide segments and may find a wide range of applications in the field of protein-protein interaction disruptors as well as in the development of synthetic vaccines or lectin mimics. The prepared synthetic antibodies were tested for their affinity towards tumour necrosis factor alpha using surface plasmon resonance and synthetic antibodies with micromolar affinities were uncovered.

Targeted Covalent Inhibition of Prolyl Oligopeptidase (POP): Discovery of Sulfonylfluoride Peptidomimetics.

Prolyl oligopeptidase (POP), a serine protease highly expressed in the brain, has recently emerged as an enticing therapeutic target for the treatment of cognitive and neurodegenerative disorders. However, most reported inhibitors suffer from short duration of action, poor protease selectivity, and low blood-brain barrier (BBB) permeability, which altogether limit their potential as drugs. Here, we describe the structure-based design of the first irreversible, selective, and brain-permeable POP inhibitors. At low-nanomolar concentrations, these covalent peptidomimetics produce a fast, specific, and sustained inactivation of POP, both in vitro and in human cells. More importantly, they are >1,000-fold selective against two family-related proteases (DPPIV and FAP) and display high BBB permeability, as shown in both lipid membranes and MDCK cells.

Potent and Highly Selective Inhibitors of the Proteasome Trypsin-like Site by Incorporation of Basic Side Chain Containing Amino Acid Derived Sulfonyl Fluorides.

A unique category of basic side chain containing amino acid derived sulfonyl fluorides (SFs) has been synthesized for incorporation into new proteasome inhibitors targeting the trypsin-like site of the 20S proteasome. Masking the former α-amino functionality of the amino acid starting derivatives as an azido functionality allowed an elegant conversion to the corresponding amino acid derived sulfonyl fluorides. The inclusion of different SFs at the P1 site of a proteasome inhibitor resulted in 14 different peptidosulfonyl fluorides (PSFs) having a high potency and an excellent selectivity for the proteolytic activity of the ß2 subunit over that of the ß5 subunit. The results of this study strongly indicate that a free N-terminus of PSFs inhibitors is crucial for high selectivity toward the trypsin-like site of the 20S proteasome. Nevertheless, all compounds are slightly more selective for inhibition of the constitutive over the immunoproteasome.

Tailoring Polyethers for Post-polymerization Functionalization by Cross Metathesis.

Olefin cross metathesis is reported for the first time to attach small molecules to a range of novel polyethers with a poly(ethylene glycol) backbone and pendent alkene groups, allowing for a loading of up to one compound per monomer unit. These polymers are tailored to prevent the occurrence of self metathesis (reaction of the polymer with itself) by varying the substitution on the pendent alkenes, thus steering their reactivity toward olefin cross metathesis. Efficient functionalization has been observed for a range of coupling partners as a proof of concept for the use of olefin metathesis to graft small and larger molecules to polyethers for drug delivery. This approach also paves the way for the use of olefin cross metathesis as an efficient method to functionalize a wide variety of polymers with pendent olefin groups.

Immobilization by Surface Conjugation of Cyclic Peptides for Effective Mimicry of the HCV-Envelope E2 Protein as a Strategy toward Synthetic Vaccines.

Mimicry of the binding interface of antibody-antigen interactions using peptide-based modulators (i.e., epitope mimics) has promising applications for vaccine design. These epitope mimics can be synthesized in a streamlined and straightforward fashion, thereby allowing for high-throughput analysis. The design of epitope mimics is highly influenced by their spatial configuration and structural conformation. It is widely assumed that for proper mimicry sufficient conformational constraints have to be implemented. This paper describes the synthesis of bromide derivatives functionalized with a flexible TEG linker equipped with a thiol-moiety that could be used to support cyclic or linear peptides. The cyclic and linear epitope mimics were covalently conjugated via the free thiol-moiety on maleimide-activated plate surfaces. The resulting covalent, uniform, and oriented coated surface of cyclic or linear epitope mimics were subjected to an ELISA to investigate the effect of peptide cyclization with respect to mimicry of an antigen-antibody interaction of the HCV E2 glycoprotein. To the best of our knowledge, the benefit of cyclized peptides over linear peptides has been clearly demonstrated here for the first time. Cyclic epitope mimics, and not the linear epitope mimics, demonstrated specificity toward their monoclonal antibodies HC84.1 and V3.2, respectively. The described strategy for the construction of epitope mimics shows potential for high-throughput screening of key binding residues by simply changing the amino acid sequences within synthetic peptides. In this way, leucine-438 has been identified as a key binding residue for binding monoclonal antibody V3.2.

Potential peptidic proteasome inhibitors by incorporation of an electrophilic trap based on amino acid derived α-substituted sulfonyl fluorides.

Peptido sulfonyl fluoride derivatives were designed and synthesized containing a substituent on the alpha position (αPSFs) with respect to the sulfonyl fluoride electrophilic trap. The chemical reactivity of these α-substituted amino sulfonyl fluorides was studied and compared with the previously described ß-substituted amino sulfonyl fluorides in order to get a deeper insight into the importance of the immediate structural environment of the sulfonyl fluoride moiety. Unfortunately, the poor solubility of the resulting αPSFs precluded a proper evaluation of their biological activity.